Casablanca Licht GmbH

TET Ceiling Light


TET is the flattest surface-mounted ceiling luminaire in the Casablanca range.Despite its small construction, the TET luminaire emits very bright and clear light.

This is helped not only by the modern energy-efficient LED chip, but also by the all-glass lens that focuses the light at an angle of approximately 70 degrees.

This focused lens light gives any room an imposing character by means of the generated light cone.

The TET ceiling light is also available without a lens with flat glass, for a wide beam / diffused light.

TET makes a good figure everywhere, whether individually in entrance areas and small bathrooms / guest toilets or multiple placed in living rooms and hallways.

The glass pane is painted on the back either in white or black.To match the aluminum housing comes in white or in black powder-coated hence.

The lamp is connected directly to the house line, no operating device is needed.

The glass optics of the TET ceiling light is held by super magnets on the housing and thus allows easy removal for cleaning the glass as well as the exchange of the LED board.The LED board is therefore changeable without the need to remove the light from the ceiling.

Dimmable by means of a suitable LED dimmer.


Casablanca Leuchten GmbH
Max-Planck-Straße 16, 63303 Dreieich | +49 (0)6103 803770 | [email protected]

TET is the flattest surface-mounted ceiling luminaire in the Casablanca range.Despite its small construction, the TET luminaire emits very bright and clear light.

This is helped not only by the modern energy-efficient LED chip, but also by the all-glass lens that focuses the light at an angle of approximately 70 degrees.

This focused lens light gives any room an imposing character by means of the generated light cone.

The TET ceiling light is also available without a lens with flat glass, for a wide beam / diffused light.

TET makes a good figure everywhere, whether individually in entrance areas and small bathrooms / guest toilets or multiple placed in living rooms and hallways.

The glass pane is painted on the back either in white or black.To match the aluminum housing comes in white or in black powder-coated hence.

The lamp is connected directly to the house line, no operating device is needed.

The glass optics of the TET ceiling light is held by super magnets on the housing and thus allows easy removal for cleaning the glass as well as the exchange of the LED board.The LED board is therefore changeable without the need to remove the light from the ceiling.

Dimmable by means of a suitable LED dimmer.

Details

The TET ceiling lights has a modern and sophisticated design, but at the same time very universal.


Material

Glass

  • White

  • Black

Fixture

  • White matt

  • Black Matt

Variants
Specifications
Item Description
Type of Luminaire Ceiling light
Designer Dieter K. Weis
Voltage max. 250 V
Light Spread Direct down
EEC ( A++ ) - ( E )
Dimmable Dimmable external
Protection IP20
Protection Class 1 (Grounded)
Replaceable Light Source   Yes
Additional Information

Replaceable Light Source

Light Fixtures Made to Last

For an above-average product lifetime and for the sake of the environment, we design and manufacture our luminaires in such a way that the light source and, if present, the driver are always replaceable. For this reason, our luminaire models either use sockets that can be fitted with commercially available LED light sources or they use LED light source that can be replaced by a qualified electrician or by us. We follow market standards so that the LED light sources we use will still be available in comparable designs in the future. In this way, we ensure that our customers can enjoy a Casablanca luminaire for a long time and that the environment is protected by avoiding electrical waste.

EPREL

European Product Registry for Energy Labelling

The EU energy labelling and ecodesign legislation help improve the energy efficiency of products on the EU market.

Ecodesign sets common EU wide minimum standards to eliminate the least performing products from the market. The energy labels provide a clear and simple indication of the energy efficiency and other key features of products at the point of purchase. This makes it easier for consumers to save money on their household energy bills and contribute to reducing greenhouse gas emissions across the EU.

The EU legislation for energy labels and ecodesign has been estimated to bring energy savings of approximately 230 Mtoe (million tonnes of oil equivalent) by 2030. For consumers, this means an average saving of up to €285 per year on their household energy bills. Moreover, energy efficiency measures will create €66 billion in extra revenue for European companies.

Suspension Types

Wire Pendant Luminaire Information

Fixture can be suspensed with either the electrical cable or a Holding Wire

Longer Suspension

High Ceilings

Casablanca pendant luminaires are supplied with suspensions for an average room height of 2.50 to 2.85 meters. The suspensions can be shortened. For higher ceilings, the luminaires can be ordered with longer suspensions.

Multiple Suspension

The double pendant allows individual positioning of the two pendants in the desired distance between from each other. Also available as „rise&fall“ suspension.

For multiple fixture mounting please place an order for an additional single pendant WITHOUT CEILING CANOPY.

Multiple Fixture

Oblique Ceilings

Casablanca luminaires can be adapted and extended with optional accessories to structural conditions and individual requirements.

Pendant luminaires cannot be mounted on sloping ceilings without modifications, otherwise there is a risk of the mounting brackets coming loose or the wire getting damaged. This is why Casablanca offers special accessories for mounting on sloping ceilings.

Rise & Fall Suspension

Casablanca luminaires can be adapted and extended with optional accessories to structural conditions and individual requirements.

Single Pendant with »Rise & Rall« Suspension (two fixing possibilities)

Ceiling Fixture

Wire Pendant Luminaire Information

In case the electric outlet isn’t located where the luminaire is planned to be installed, we recommend the decentralized fixing possibility. Longer electric cables or holding wires are available for a surcharge.
 

Central fixing possibility

Decentralised fixing possibility


Material

Glass

White

Black

Fixture

White matt

Black Matt

Specifications

Type of Luminaire
Ceiling light
Designer
Dieter K. Weis
Voltage
max. 250 V
Light Spread
Direct down
EEC
( A++ ) - ( E )
Dimmable
Dimmable external
Protection
IP20
Protection Class
1 (Grounded)

Varianten

TET without lens


Dimensions
  • A: Ø 14,5 cm
  • B: 2 cm
  • C: Ø 19 cm
Light Source
  • LED ca. 10W (=10kWh/1.000h) | 890Lm | 2.700K | >90CRI/Ra | >50.000Std. | EEK: A+

Color Model
Glass white - fixture white TE03-LD210W
Glass black - fixture white TE06-LD210W
Glass black - fixture black TE06-LD210S

TET with lens


Dimensions
  • A: Ø 14,5 cm
  • B: 2 cm
  • C: Ø 19 cm
Light Source
  • LED ca. 10W (=10kWh/1.000h) | 890Lm | 2.700K | >90CRI/Ra | >50.000Std. | EEK: A+

Color Model
Glass white - fixture white TE02-LD210W
Glass black - fixture white TE05-LD210W
Glass black - fixture black TE05-LD210S

TET without lens

Dimensions
A: Ø 14,5 cm
B: 2 cm
C: Ø 19 cm
Light Source
LED ca. 10W (=10kWh/1.000h) | 890Lm | 2.700K | >90CRI/Ra | >50.000Std. | EEK: A+
Glass white - fixture white
TE03-LD210W
Glass black - fixture white
TE06-LD210W
Glass black - fixture black
TE06-LD210S

TET with lens

Dimensions
A: Ø 14,5 cm
B: 2 cm
C: Ø 19 cm
Light Source
LED ca. 10W (=10kWh/1.000h) | 890Lm | 2.700K | >90CRI/Ra | >50.000Std. | EEK: A+
Glass white - fixture white
TE02-LD210W
Glass black - fixture white
TE05-LD210W
Glass black - fixture black
TE05-LD210S

Downloads

Files
TET Datasheet Datasheet In-Browser
LED-TET-TETMULTI.pdf Replacement In-Broswer